B&B attachments' product catalogue

Fork Positioners

The Family of KAUP Fork Positioners After sideshifters the most popular attachments for forklift trucks are Fork Positioners. They are an important supplement of the forklift truck especially where the width of the load constantly changes. Adjustment of the distance between forks to accommodate different widths is a important aspect of safeguard in this kind of operation. KAUP realises the importance of these attachments and has therefore three different ranges in its programme. The range T 163 SN: Inexpensive, simple Fork Positioner with absolutely symmetrical fork adjustment via positive synchronism over a roller chain. The original forklift truck forks can be used. The construction width and therefore the opening range of the attachment is not dependent on the width of the fork carriage of the forklift truck. Also available without sideshift (T163 N). The range T 466: extremely variable concept with a total of four different executions T 466 - hook on construction allowing the use of the original truck forks T 466 Z - hook on construction with forks welded on T 466 I - integrated construction allowing the use of the original truck forks T 466 IZ - integrated constructions with forks welded on Especially the both integrated versions with welded on forks offer an excellent residual capacity. The hook on versions are also available without sideshift. The ranges T 411 Z, T 411 BZ, T 411 BZI: Fork Positioners for extremely tough operation. The T 411 Z range of Fork Positioners is based on the T 400 Clamp range. The forks can be opened further than the construction width of the clamp body. Due to the large profile covering between fork guide and clamp body, spreading forces e.g. for the transportation of coils or cable drums, can easily be done. Separate sideshift enables the load to be handled with the forks fully opened or closed together. The BZ and BZI executions have the so called valve block sideshift. (No sideshift possible when the forks are opened to the widest position). The size of the sideshift is a function of the distance between forks. This execution is standard conception for large opening ranges - zo ti 4400 mm measured over the outer edges of forks. The BZI version is for integrating into the mast instead of a fork carriage to achieve even better residual capacities.The Family of KAUP Fork Positioners After sideshifters the most popular attachments for forklift trucks are Fork Positioners. They are an important supplement of the forklift truck especially where the width of the load constantly changes. Adjustment of the distance between forks to accommodate different widths is a important aspect of safeguard in this kind of operation. KAUP realises the importance of these attachments and has therefore three different ranges in its programme. The range T 163 SN: Inexpensive, simple Fork Positioner with absolutely symmetrical fork adjustment via positive synchronism over a roller chain. The original forklift truck forks can be used. The construction width and therefore the opening range of the attachment is not dependent on the width of the fork carriage of the forklift truck. Also available without sideshift (T163 N). The range T 466: extremely variable concept with a total of four different executions T 466 - hook on construction allowing the use of the original truck forks T 466 Z - hook on construction with forks welded on T 466 I - integrated construction allowing the use of the original truck forks T 466 IZ - integrated constructions with forks welded on Especially the both integrated versions with welded on forks offer an excellent residual capacity. The hook on versions are also available without sideshift. The ranges T 411 Z, T 411 BZ, T 411 BZI: Fork Positioners for extremely tough operation. The T 411 Z range of Fork Positioners is based on the T 400 Clamp range. The forks can be opened further than the construction width of the clamp body. Due to the large profile covering between fork guide and clamp body, spreading forces e.g. for the transportation of coils or cable drums, can easily be done. Separate sideshift enables the load to be handled with the forks fully opened or closed together. The BZ and BZI executions have the so called valve block sideshift. (No sideshift possible when the forks are opened to the widest position). The size of the sideshift is a function of the distance between forks. This execution is standard conception for large opening ranges - zo ti 4400 mm measured over the outer edges of forks. The BZI version is for integrating into the mast instead of a fork carriage to achieve even better residual capacities.

T 163 SN
	High visibility on all models Good capacity to weight ratio Available with forks or can be supplied for use with trucks own forks Sideshift as standard Integrated version available Allows movement of fork spread from drivers seat on fork truck ensures correct positioning of forks for load handled Forks positioners allow productivity All steel construction Available in many versions to suit applications

T466I
	High visibility through frame Sideshift rear mounting as standard, ensuring sideshift at all points of opening Large variety of opening ranges Good capacity to weight ratio Available with turnable forks All steel construction Enable the handling of pallets or wide loads with forks spread controlled by driver of lift truck

T466Z - Test
	High visibility through frame test Sideshift rear mounting as standard, ensuring sideshift at all points of opening Large variety of opening ranges Good capacity to weight ratio Available with turnable forks All steel construction Enable the handling of pallets or wide loads with forks spread controlled by driver of lift truck

T 466 IZ
	High visibility through frame Sideshift rear mounting as standard, ensuring sideshift at all points of opening Large variety of opening ranges Good capacity to weight ratio Available with turnable forks All steel construction Enable the handling of pallets or wide loads with forks spread controlled by driver of lift truck

T411BZ
	High visibility through frame Sideshift rear mounting as standard, ensuring sideshift at all points of opening Large variety of opening ranges Good capacity to weight ratio Available with turnable forks All steel construction Enable the handling of pallets or wide loads with forks spread controlled by driver of lift truck

T411BZI
	High visibility through frame Sideshift rear mounting as standard, ensuring sideshift at all points of opening Large variety of opening ranges Good capacity to weight ratio Available with turnable forks All steel construction Enable the handling of pallets or wide loads with forks spread controlled by driver of lift truck